Be wise in choosing the electricity provider

The decision to change electricity provider is a major one.  It is not easy to just change the services.  One needs to make good research before signing up for a new electricity company or provider.  There are lot of things that one needs to check especially regarding their genuine, reliability, services offered and the different plans.  There are so many such services available that one can easily get fooled if proper research is not done before approaching an electricity company for buying of electricity either for personal or business use.  One should be very careful before making the change.

 

Be wise in choosing the electricity provider

In the current scenario, you have the power to choose your electricity company.  This task is definitely not easy and requires lot of research and study into it.  The responsibility lies in yourself to ensure that you think about all the possible questions that you want to ask and find out before deciding on one company.  Always make sure that you ask the right questions to your energy provider and that the answers given by them make sense to you and have the logic and reasoning in them.  Only then should you go ahead by discussing further details with the company.  Remember that questions are the key to knowledge and only if you ask the right question will you get the correct answer that might solve your confusion.

 

Few things that you ought to know before signing the contract is, when does my contract gets terminated?  Can I be re-billed?  Can I be switched to any other plan without prior consent?  What are the options available to pay the bill? And what can I do if am unable to pay the bill?  These are just a few questions but there might be many others that you might think is necessary to ask before entering into any contract.

 

Fraud is prevalent throughout the world, it is always good to be alert and cautious before getting into anything permanent or even on a contractual term.  Signing up with an electricity company is usually for a long term as no one wants to change the provider every now and then.  The best bet is to look into all the possible questions, check on any loop holes or negative aspect before fixing on a particular company that would take care of your entire electricity requirement for a considerable amount of time.

 

Be more energy efficient and get low electricity bills by choosing the correct provider who will give you the best options to buy cheap electricity that will in turn give you low electricity monthly bill which will not cause a hole in your pocket.  Be wise and use Shop Dallas Electricity for purchasing of cheap electricity and also for choosing the best electricity provider that Dallas can give you, for both your personal and business use.

Solar Energy Facts

When most people hear “solar energy,” they think of the large glass panels that collect light from the sun and generate electricity. This is known as solar photovoltaic (PV) energy. Passive solar energy doesn’t directly generate electricity or energy, but rather allows you to use the sun to make your home more comfortable. Passive solar energy is managed depending on your climate, geographic location, and building materials. When building from scratch, a passive solar home can take advantage of a lot of energy saving measures.

Solar Energy Facts

            Passive solar homes are designed to use sunlight to its advantage as much as possible. This can include directly heating the home during the winter with large, south facing windows. The light then hits materials that retain the heat, which they will radiate as the day progresses. This can only be attained if the windows are properly angled and the floor is made from a material that both absorbs and radiates heat, such as stone.

               If you already have a home but want to implement some passive solar elements, you can still do that. It is best to start with a home energy audit. This will tell you where areas of your home need improvement to be more efficient. To implement passive solar features, you still need an unobstructed view of the sun, preferably from the south. Keep windows facing this direction clean to let in the most light. Be wary of planting trees on this side of your home, as they could grow to block your sunlight. The United States is on track to become the fourth largest solar market in the world. In the first quarter of 2012, solar energy development increased by 85% over the previous year, and continued developments are likely to put the nation well ahead in the solar energy game.

                      There are also special films you can apply to windows that reflect UV light, which is what warms up your home. This is useful for the cooling season and is best applied to the western side of the home. The southern side gets more light in the winter than the summer because the sun is lower in the sky, so these windows can be left without the film. The film blocks UV light, but it doesn’t really obstruct natural light, so you can still enjoy the benefits of a passively solar lit home during the day. Want renewable energy to power your home? Check out our renewable electricity plans from the several electric companies we work with!

Fall has Arrived, Is your Home Prepared?

The summer is winding down and cooler temperatures will be rolling in. Last winter saw some very low temperatures in Texas, bringing ice storms to Dallas and high heat bills as far south as Houston. Now is the time to prepare your home to take advantage of cheap electric rates and make your home more energy efficient. The transition between summer and fall typically see the cheapest electricity rates for the year, making it a good time to switch. Making your home efficient on top of that will help you save a bundle while you bundle up for winter. Fall has Arrived Is your Home Prepared

  • Insulation
    • Check the insulation in your attic. If you have at least 15 inches, your attic is well insulated.
    • Look for windows that are drafty, or whistle and rattle when it is windy out. These windows should be weatherstripped to prevent your indoor air from escaping. At most, the windows should be replaced with newer, more energy efficient windows.
    • Seal up the gaps around door frames, especially the large ones at the bottom of the door. These can be sealed with rubberized thresholds or a row of brushes. You can also buy or make a soft door snake to block this gap.
  • Lighting
    • As older incandescent bulbs burn out, replace them with higher efficiency bulbs like CFLs or LEDs.
    • Use timers, photocells, or occupancy sensors to help regulate light usage. Timers only run lights during the day for a time frame you set. Photocells adjust the amount of light based on ambient light, such as sunlight. Occupancy sensors turn lights on when they detect movement and shut them off when no movement is present for a set period of time.
    • Use LED strings of holiday lights for decorating. They are brighter and last 25 times longer than incandescent strings.
  • Water
    • Most water heaters are factory set to 140°F, but setting them to 120°F will keep the water hot but save you some money.
    • Insulating hot water pipes as well as the heating tank will retain more heat while en route to a faucet or showerhead. Hot water will come out sooner and remain up to 4° hotter.
    • Flush about a gallon of water out of the heating tank by opening the drain valve at the bottom. This will remove sediment that gathers in the tank and improve heating.
  • Electronics
    • For any appliances that have them, use energy saving power options.
    • Use power strips to cloister several appliances into a single outlet. You can shut of this power strip when the appliances are not in use to cut back on phantom loads (electricity that is drawn while appliances and electronics are off).
    • Upgrade electronics and appliances to Energy Star certified models. Energy Star certified equipment is 20-30% more efficient than uncertified models.
  • Climate Control
    • Set your thermostat lower than normal for the heating months. By setting it to about 68°F, you will save a fair amount of energy in keeping your home comfortable.
    • Using a programmable thermostat to regulate the heat in your home will save you a lot of money and energy. These thermostats can automatically turn off the heat while you are at work or overnight while you are asleep, so you don’t need to worry about the heat running nonstop all day.
    • Clean or replace the air filter in your HVAC system every 1-3 months. A clean filter provides better airflow, which improves efficiency.
    • Make sure vents and ducts are properly sealed so you aren’t losing climate controlled air before it even enters the room.
    • If your furnace is more than 10 years old, consider upgrading it to a newer model. The energy savings will be immediate and the furnace will pay for itself in the coming years.
  • Energy Provider
    • Fall is a good time to exercise your electric choice and choose an energy provider with low rates. Rates are generally at their lowest at this time of year.

You have the power to choose your Dallas electricity company, and you can use our website to review plans from different providers and pick the one that suits you.

The Most Energy Efficient States

Energy efficiency has become a major point in economics and environmental protection. As such, many countries around the world have begun taking measures to improve the efficiency of their energy consumption. The United States is part of this, and some states within the Union are really taking the reins on these projects. The American Council for an Energy Efficient Economy (ACEEE) has put together a list every year for the past seven years of the most energy efficient states in the US. Below is the 2014 list of these states.

The Most Energy Efficient States

  1. Illinois - Of the past seven years, 2014 is the first that saw Illinois make the list. The state jumped four positions from last year thanks to its improved, energy efficient building codes and utility and public benefit programs.
  2. Maryland – Maryland has made the ACEEE’s list for the past three years, attributing their success to transportation, utilities, and public benefits programs. The EmPOWER Maryland program especially set the bar for energy efficiency by making efficiency improvements more cost effective.
  3. Washington – Part of the list for all seven years, Washington implements and strongly enforces strict energy efficient building codes. Many other states have these energy efficiency building codes, but a good number don’t enforce them as much as this state does.
  4. Vermont – Vermont improved the efficiency of the utilities in the state through a non-profit organization that provided various financial benefits for implementing energy efficiency programs. This organization, Efficiency Vermont, has made Vermont a shining example of how a third party administration can drastically improve the energy efficiency of a state.
  5. Rhode Island – The tiniest state has some of the best scores when it comes to energy efficiency. Along with using high efficiency building codes and an energy efficient utility sector, the Ocean State also funds the Energy Efficient Resource Standard (EERS) which sets long term goals for energy efficiency.
  6. Connecticut - Connecticut has a lot of incentives for energy efficiency. These incentives are spread across multiple sectors in the state. Some of them include grants to improve the heating systems in schools, loans for projects to improve energy efficiency in homes or businesses, and free energy efficiency evaluations for homeowners.
  7. Oregon – Another state with strict energy building codes, Oregon has standards even above the highest international standards. They also implemented numerous government initiatives and emission reduction plans for the large metropolitan areas’ transportation.
  8. New York – New York has vowed to reduce emissions by lowering the vehicle miles travelled (VMT) score by 10% over 10 years. Five years into that promise, they are well on their way to making good on it. They also have several transportation based policies to improve public transportation emissions. A portion of the fees collected from license and registration renewals goes to the public transportation sector, lowering the cost of using public transportation.
  9. California – Always in one of the top two spots for the past seven years, California takes energy efficiency very seriously. The state heavily promotes renewable energy standards and reduction of vehicle emissions. The state plans to reduce vehicle emissions by up to 8% and reduce the overall emission levels from 1990 by 25% by the year 2020.
  10. Massachusetts – Taking the number 1 spot this year is Massachusetts, which has held this spot for four years now. One of the major points driving their top marks is the policy that all energy providers MUST purchase and install all energy improvements that “cost less than it does to generate power.” This policy has helped jump start an energy efficiency initiative that has bolstered the whole state, including the utility sector and public benefit programs.

Simple ways to heat your home for fall

Heating is your highest energy expense. Heating costs about 40 percent of your energy bill while cooling costs about 12 to 15 percent of your utility bill. Here are some tips to save on your heating and also cooling your home until the weather is colder:

shop-dallas-electricity

  1. Check the reliability of your thermostat. In order to do so you should place a thermometer next to the thermostat, if they are both coming up to the same temperature then its fine otherwise it might be the time to switch your thermostat. Programmable thermostats are the best way to go these days as they help you set the temperature according to the settings you program on it and they are more energy efficient as you can also get their energy star version.
  2. Don’t mess with your thermostat. Set your thermostat at 68° F or lower for heating and 78° F or higher for cooling. At bedtime set the thermostat at 55° F. Make sure your home is not being heated and cooled when no one is at home.
  3. Do not start using your heater unless you really need it. First warm yourself up with sweaters and blankets and turn on the heater only when it gets too cold. Try wearing socks and keeping your fingers and toes covered as this will keep you warmer.
  4. Make sure your home is well insulated. Wall, ceiling, floor and attic insulation will keep warmth in during the winter and heat out during the summer. Check the insulation of your home and check if all the vents and ducts are working properly. You may have repair or replace the ducts or they might be consuming extra energy while providing insufficient heating and cooling.
  5. Never turn your thermostat way up or way down to speed up the heating or cooling process. This will force your unit to work harder, stay on longer and use more energy.
  6. Seal unused rooms and close all the vents of unused rooms so excess heating or cooling is not required to keep that room at a comfortable temperature.
  7. Use your air conditioning more effectively. Do not use heat consuming appliances in the middle of the day and during the evenings when the temperature is already very high. Laundry, ironing, cooking and other high energy consuming activities are best done early morning and late evening to better save the home from overheating.
  8. You can also cover your windows with plastic wrap so that cool air does not enter your home and heat stays inside during the winter months.